AMI-TUF SGL1700 High Temp Welding Curtain Silicone Fiberglass Fabric 750 Sq Ft

Description

AMI-TUF SGL1700 High Temperature Welding Curtain Silicone Fiberglass Fabric
SGL1700-60 NS Grey
Silicone impregnated, 100% fiberglass fabric.
FM Approved Welding Curtain
Tested and approved to ANSI/FM4950 as required by NFPA 51B, 2009 Edition.
High temperature protection while remaining flexible and also offering a high degree of abrasion resistance.
Specifically designed for use as a jacketing material for high temperature removable insulation pads or for welding cloths or curtains.
McMaster-Carr's price for this material is .49 per 60" x 12", which is .498 per sq ft or ,623.50 per roll. Save 55% off retail.
Each roll is 60" x 50 yards per roll or 5' x 150' (750 square feet) per roll. Free delivery to the continental USA if you buy a full roll or more.
We can also cut to length, please contact us so we can setup a custom listing. Minimum length is 15 feet long. Make your own custom welding shields!
Applications include:
Removable insulation pads
Equipment covers
Flange covers
Spray shields
Welding blankets / curtains to shed weld splatter
Expansion joints
Safety clothing
Features and Benefits:
Water & oil resistant
Flame retardant
Acid and alkali resistance
Low smoke developed
Increased abrasion resistance
Flexible
Easily sewn
Can meet NRC 1.36 and MIL-I-24244 when required.
Increased durability provides longer life for insulation pads.
U.S. Navy approved for spray shield fabrication Dwg. 803-2145518 Rev G
Does not absorb liquids
Can be wiped clean increasing life and safety of fabric
Lightweight
Service temperature of -67F to +500F
Claremont Corporation sells this through their Claretex Coated Fabrics line and Auburn Manufacturing, Inc also seems to sell this material.
AMI-TUF CLOTH
STYLE #SGL1700, SGL1700
NOMINAL WIDTH: 60"
WEIGHT: 17.0 OZ YD 2 ± 10%
THICKNESS: 0.016" ± 10%
BASE FABRIC & WEAVE: FIBERGLASS/SATIN WEAVE (COUNT: WARP: 48; FILL: 31)
COLORS & COATING: GRAY
TEMPERATURE RESISTANCE*: 500° F
TENSILE STRENGTH:
WARP: 250 LBS/IN MIN. AVG.
FILL: 200 LBS/IN MIN. AVG.
TEAR STRENGTH:
WARP: 50 LBS MIN. AVG.
FILL: 25 LBS MIN. AVG.
FLAME RESISTANCE:
FLAME OUT(SEC): 1 SECOND
AFTERGLOW(SEC): 2.5 SECONDS
CHAR LENGTH(INCHES): 0.3 MAX. AVG.
BURST STRENGTH:
200 LBS/IN 2 MIN. AVG.
HYDROSTATIC RESISTANCE:
200 LBS/IN 2 MIN. AVG.
TEST METHOD INFORMATION AVAILABLE - SEE TEST METHOD SUMMARY SHEET
NFPA701/1999
MEETS THE REQUIREMENTS OF TEST METHODS 1 & 2
TEST REPORTS ON FILE
THIS PRODUCT HAS BEEN TESTED AND FM APPROVED AS A WELDING CURTAIN TO
ANSI/FM 4950 FOR HOT WORK PROTECTION. TEST DATA AVAILABLE UPON
REQUEST. REFERENCE PROJECT ID # 3015367.
SPECIAL MARKINGS:  PRODUCT MARKED IN ACCORDANCE WITH FM APPROVAL STANDARD 4950
INCLUDING DESIGNATION AS A WELDING CURTAIN AND WITH USES AND
LIMITATIONS INFORMATION.
*ALTHOUGH BASE FABRIC IS RATED TO 1000° F CONTINUOUS OPERATING TEMPERATURE, SILICONE COATING IS RATED TO 500° F ON A CONTINUOUS BASIS.
AMI-TUF STYLE SGL1700 IS A FIBERGLASS BASE FABRIC WHICH HAS BEEN COATED WITH A SPECIALLY FORMULATED SILICONE RUBBER COMPOUND. IT PROVIDES GREATER ABRASION PUNCTURE AND TEAR RESISTANCE TO OUR BASE FIBERGLASS FABRIC. SILICONE COATED FIBERGLASS FABRIC PROVIDES GREATER LIFE, WATER AND OIL REPELLANCY THAN UNCOATED FABRICS WHILE PROVIDING LOW SMOKE AND FLAME RETARDANCY.
NOTE: MATERIAL SHOULD BE TESTED FOR ITS SUITABILITY IN ANY APPLICATION. USERS SHOULD ALSO FAMILIARIZE THEMSELVES WITH THE MSDS BEFORE HANDLING.
ALL STATEMENTS HEREIN ARE EXPRESSIONS OF OPINION WHICH THE MANUFACTURER BELIEVE TO BE ACCURATE AND RELIABLE BUT ARE PRESENTED WITHOUT GUARANTEE OR RESPONSIBILITY ON THEIR OR OUR PART. ANYONE INTENDING TO USE RECOMMENDATIONS CONTAINED IN THIS PUBLICATION CONCERNING EQUIPMENT, PROCESSING TECHNIQUES OR PRODUCTS SHOULD FIRST SATISFY HIMSELF THAT THE RECOMMENDATIONS ARE SUITABLE FOR HIS OR HER USE AND MEET ALL APPROPRIATE SAFETY AND HEALTH STANDARDS.
Tough coated fiberglass stands up to industrial punishment.
AMI-TUF® coated fiberglass cloth is the ideal solution for the outer layer of removable insulation pads on pipes, valves and joints (see AMI-FAB® System for details). Use AMI-TUF tape as pipe wrap in harsh industrial environments. AMI-TUF can also be fabricated into light, medium or heavy duty AMI-GUARD welding blankets; the silicone rubber coating provides a non-slip surface when used as a floor covering in high traffic areas.
Silicone rubber coated fabrics provide superior water, oil and heat resistance
Continuous protection to 500°F (limit of Silicone)
High abrasion resistance
Strong and durable
AMI-TUF (Silicone Coated Fiberglass Cloth)
AMI-TUF® (SGL) Cloth
AMI-TUF® is a silicone rubber coated fiberglass cloth. This product is a strong and durable textile that is FM Approved and meets the requirements of NFPA 51B. The special silicone rubber coating extends the life of the fabric and provides superior water, oil and heat resistance.
Product Type
SGL1700 17 oz
Product Number
SGL1700
Continuous Operating Temperature
500°F (260°C)
FM Approved
Yes
Performance Category
Curtain
Unit of Measure
YDS (Yards)
Weight (oz. per sq. yard)
17
Thickness (inches)
0.016"
Available Width
60"
Application Environment
Indoor, Outdoor, Vertical
Application Rating Key
05 Better
3rd Party Spec.
ANSI/FM 4950 – FM Approved, ASTM C1695-09