ACU-STOP 4MMx60CMx11,5MT High density acoustic insulation panel

Description

ACU-STOP 4MMx60CMx11,5MT
Acoustic insulation consisting of a sound-resistant foil based on bitumen, high density (4 kg/m²) with both surfaces coated with a textile finish of polypropylene
Thickness 4 mm
It is a high density foil that has the acoustic properties of the lead sheet, even though she was completely free. It acoustically isle as a lead sheet of the same weight, but is exempt from the typical toxicological problems of this metal. To be used for the insulation of old containers of roller shutters, especially those facing the street, or in general when required extra soundproofing, which can reduce noise emissions by up to 10dB. It is installed by placing it above the Flexoterm panel, which constitutes the supporting structure. Unlike ordinary EPDM panels, thanks to its particular structure not elastic, it follows perfectly the profile, fundamental situation for the best acoustic performance. Thanks to a high value of resistance to water vapor, the membrane also acts as a vapor barrier against the humidity inside the house, preventing the appearance of mold on the perimeter dumpster. The panel is fully recyclable, is a non-hazardous waste and gives LEED credits. It 'available in rolls of 11.5 meters in length, h.60 cm.
Fields of application:
The Acu-Stop panel is a component of PosaClima Renova system specifically designed for the insulation of old wooden boxes, sheet metal or masonry. It should be used in all situations where you want to achieve a significant increase in soundproofing power of the dumpster. Is installed in a very simple and fast: after cutting to size, in dumpsters with front inspection, Acu-Stop panel is leaning over the Flexoterm panel (10 or 20 mm), and secured at the top with tape double-sided adhesive directly on the polyethylene panel, while the lower part is inserted under the Termopav panel. Also in dumpsters with less inspection, you can proceed in a similar manner. Adherent surfaces must be clean and at the time of the application must be no surface liquid water or ice. Remove them before applying the product, which nevertheless is completely waterproof and is not afraid of any stagnant water in the dumpster.
Brand:
PosaClima
Manufacturer code:
KLRACU4
Andromedagie code:
RNV00404B
Upgrading the energy efficiency of the window hole without masonry (IT)
Manuals - The thermo-acoustic insulation of the box (IT)
Data sheet - Acu-Stop (IT-EN)
Comment Feedback